Water Storage Tanks, Inc.

"One of a kind, one at a time." rainwater collectiongalvanized water tanks




TANK SELECTOR QUESTIONNAIRE:

Use the following information and fully complete the questionnaire in order to obtain a quote.
Items with an asterisk * are required.

You may find it helpful to print the CorGal Tank Selection Guide listed by tank capacity before beginning.

                               

QUESTIONNAIRE:

* Your Name:


* Company:


* E-mail:


* E-mail Confirm:


* Project Name:


* Project Address:


* Project City:


* Project County:


* Project State or Province:


* Project Zip or Postal Code:


* Project Country:

* How much water storage capacity is required? (US Gallons)



* Application/Use of Tank.



Go to the CorGal Tanks Listed by Capacity Chart above and find the model number of the water tank which will contain the required storage capacity. Enter the model number here.

* Model #    * Qty

PROJECT SITE CONDITIONS

Standard CorGal tanks are designed for locations with the following requirements.

IBC wind load 90 MPH?
Yes, standard wind load
No, wind load is:


Snow load 25# per Sq. Foot?
Yes, standard snow load
No, snow load is:


IBC Seismic Zone 2B?
Yes, standard IBC Seismic Zone 2B
No, seismic zone is:


A factory tank design package is required if any non-standard site options are selected. Is a factory tank design package required for permitting?
No, a factory tank design package is NOT required.
Yes, a factory tank design package is required.

ROOF TYPE SELECTION
If tank model is 12XX or higher then skip to
LADDERS

If tank model is 06XX, 08XX or 09XX, then select Roof Type.

Roof Type:

LADDERS
 Is an exterior ladder required?
Yes, an exterior ladder is required.
No, an exterior ladder is NOT required.

Is a safety cage required for the exterior ladder?
Yes, a safety cage is required for the exterior ladder.
No, a safety cage is NOT required for the exterior ladder.

Is a security cover required for the exterior ladder?
Yes, a security cover is required for the exterior ladder.
No, a security cover is NOT required for the exterior ladder.

Is an interior ladder required?
Yes, an interior ladder is required.
No, an interior ladder is NOT required.

ACCESSORIES
Is a roof vent required?
If a roof vent is required, please specify quantity.


Is an oversized top center roof access required?
No, an oversized top center roof access is NOT required.
Yes, an oversized top center roof access is required.

Is top cap handrail package required?
No, a top cap handrail package is NOT required.
Yes, a top cap handrail package is required.

Is a safety rest platform required?
No, a safety rest platform is NOT required.
Yes, a safety rest platform is required.

Is a roof support ring required?
No, a roof support ring is NOT required.
Yes, a roof support ring is required.

PIPING CONNECTIONS TO TANK

Is an overflow fitting required?
No, skip to next section

Yes, an overflow fitting is required.

If Other was selected, please indicate below what pipe material will be used and proceed to suction outlet fittings.


Are penetration flange sets required?
No, skip to next section

Yes, penetration flange sets are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PF-PVC-1.5
2" pipe size part # PF-PVC-2.0
3" pipe size part # PF-PVC-3.0
4" pipe size part # PF-PVC-4.0
6" pipe size part # PF-PVC-6.0
8" pipe size part # PF-PVC-8.0
10" pipe size part # PF-PVC-10.0
12" pipe size part # PF-PVC-12.0
14" pipe size part # PF-PVC-14.0
16" pipe size part # PF-PVC-16.0
18" pipe size part # PF-PVC-18.0
20" pipe size part # PF-PVC-20.0

Are penetration boots required?
No, skip to next section

Yes, penetration boots are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PB-PVC-1.5
2" pipe size part # PB-PVC-2.0
3" pipe size part # PB-PVC-3.0
4" pipe size part # PB-PVC-4.0
6" pipe size part # PB-PVC-6.0
8" pipe size part # PB-PVC-8.0
10" pipe size part # PB-PVC-10.0
12" pipe size part # PB-PVC-12.0
14" pipe size part # PB-PVC-14.0
16" pipe size part # PB-PVC-16.0
18" pipe size part # PB-PVC-18.0
20" pipe size part # PB-PVC-20.0

Is a suction outlet fitting required?
No, skip to next section

Yes, a suction outlet overflow fitting is required.

If Other was selected, please indicate below what pipe material will be used and proceed to drain fittings.


Are penetration flange sets required?
No, skip to next section

Yes, penetration flange sets are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PF-PVC-1.5
2" pipe size part # PF-PVC-2.0
3" pipe size part # PF-PVC-3.0
4" pipe size part # PF-PVC-4.0
6" pipe size part # PF-PVC-6.0
8" pipe size part # PF-PVC-8.0
10" pipe size part # PF-PVC-10.0
12" pipe size part # PF-PVC-12.0
14" pipe size part # PF-PVC-14.0
16" pipe size part # PF-PVC-16.0
18" pipe size part # PF-PVC-18.0
20" pipe size part # PF-PVC-20.0

Are penetration boots required?
No, skip to next section

Yes, penetration boots are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PB-PVC-1.5
2" pipe size part # PB-PVC-2.0
3" pipe size part # PB-PVC-3.0
4" pipe size part # PB-PVC-4.0
6" pipe size part # PB-PVC-6.0
8" pipe size part # PB-PVC-8.0
10" pipe size part # PB-PVC-10.0
12" pipe size part # PB-PVC-12.0
14" pipe size part # PB-PVC-14.0
16" pipe size part # PB-PVC-16.0
18" pipe size part # PB-PVC-18.0
20" pipe size part # PB-PVC-20.0

Is a drain fitting required?
No, skip to next section

Yes, a drain fitting is required.

If Other was selected, please indicate below what pipe material will be used and proceed to tank interconnect pipe fitting.


Are penetration flange sets required?
No, skip to next section

Yes, penetration flange sets are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PF-PVC-1.5
2" pipe size part # PF-PVC-2.0
3" pipe size part # PF-PVC-3.0
4" pipe size part # PF-PVC-4.0
6" pipe size part # PF-PVC-6.0
8" pipe size part # PF-PVC-8.0
10" pipe size part # PF-PVC-10.0
12" pipe size part # PF-PVC-12.0
14" pipe size part # PF-PVC-14.0
16" pipe size part # PF-PVC-16.0
18" pipe size part # PF-PVC-18.0
20" pipe size part # PF-PVC-20.0

Are penetration boots required?
No, skip to next section

Yes, Penetration Boots are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PB-PVC-1.5
2" pipe size part # PB-PVC-2.0
3" pipe size part # PB-PVC-3.0
4" pipe size part # PB-PVC-4.0
6" pipe size part # PB-PVC-6.0
8" pipe size part # PB-PVC-8.0
10" pipe size part # PB-PVC-10.0
12" pipe size part # PB-PVC-12.0
14" pipe size part # PB-PVC-14.0
16" pipe size part # PB-PVC-16.0
18" pipe size part # PB-PVC-18.0
20" pipe size part # PB-PVC-20.0

Is a fitting for tank interconnect piping required?
No, skip to next section

Yes, an interconnect pipe fitting is required.

If Other was selected, please indicate below what pipe material will be used and proceed to high water level sensor.


Are penetration flange sets required?
No, skip to next section

Yes, penetration flange sets are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PF-PVC-1.5
2" pipe size part # PF-PVC-2.0
3" pipe size part # PF-PVC-3.0
4" pipe size part # PF-PVC-4.0
6" pipe size part # PF-PVC-6.0
8" pipe size part # PF-PVC-8.0
10" pipe size part # PF-PVC-10.0
12" pipe size part # PF-PVC-12.0
14" pipe size part # PF-PVC-14.0
16" pipe size part # PF-PVC-16.0
18" pipe size part # PF-PVC-18.0
20" pipe size part # PF-PVC-20.0

Are penetration boots required?
No, skip to next section

Yes, Penetration Boots are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PB-PVC-1.5
2" pipe size part # PB-PVC-2.0
3" pipe size part # PB-PVC-3.0
4" pipe size part # PB-PVC-4.0
6" pipe size part # PB-PVC-6.0
8" pipe size part # PB-PVC-8.0
10" pipe size part # PB-PVC-10.0
12" pipe size part # PB-PVC-12.0
14" pipe size part # PB-PVC-14.0
16" pipe size part # PB-PVC-16.0
18" pipe size part # PB-PVC-18.0
20" pipe size part # PB-PVC-20.0

Is a fitting for high water level sensor required?
No, skip to next section

Yes, a high water level sensor fitting is required.

If Other was selected, please indicate below what pipe material will be used and proceed to low water sensor.


Are penetration flange sets required?
No, skip to next section

Yes, penetration flange sets are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PF-PVC-1.5
2" pipe size part # PF-PVC-2.0
3" pipe size part # PF-PVC-3.0
4" pipe size part # PF-PVC-4.0
6" pipe size part # PF-PVC-6.0
8" pipe size part # PF-PVC-8.0
10" pipe size part # PF-PVC-10.0
12" pipe size part # PF-PVC-12.0
14" pipe size part # PF-PVC-14.0
16" pipe size part # PF-PVC-16.0
18" pipe size part # PF-PVC-18.0
20" pipe size part # PF-PVC-20.0

Are penetration boots required?
No, skip to next section

Yes, High Water Penetration Boots are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PB-PVC-1.5
2" pipe size part # PB-PVC-2.0
3" pipe size part # PB-PVC-3.0
4" pipe size part # PB-PVC-4.0
6" pipe size part # PB-PVC-6.0
8" pipe size part # PB-PVC-8.0
10" pipe size part # PB-PVC-10.0
12" pipe size part # PB-PVC-12.0
14" pipe size part # PB-PVC-14.0
16" pipe size part # PB-PVC-16.0
18" pipe size part # PB-PVC-18.0
20" pipe size part # PB-PVC-20.0

Is a fitting for low water level sensor required?
No, skip to next section

Yes, a fitting for low water level sensor is required.

If Other was selected, please indicate below what pipe material will be used and proceed to temperature sensor fitting.


Are penetration flange sets required?
No, skip to next section

Yes, penetration flange sets are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PF-PVC-1.5
2" pipe size part # PF-PVC-2.0
3" pipe size part # PF-PVC-3.0
4" pipe size part # PF-PVC-4.0
6" pipe size part # PF-PVC-6.0
8" pipe size part # PF-PVC-8.0
10" pipe size part # PF-PVC-10.0
12" pipe size part # PF-PVC-12.0
14" pipe size part # PF-PVC-14.0
16" pipe size part # PF-PVC-16.0
18" pipe size part # PF-PVC-18.0
20" pipe size part # PF-PVC-20.0

Are penetration boots required?
No, skip to next section

Yes, penetration boots are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PB-PVC-1.5
2" pipe size part # PB-PVC-2.0
3" pipe size part # PB-PVC-3.0
4" pipe size part # PB-PVC-4.0
6" pipe size part # PB-PVC-6.0
8" pipe size part # PB-PVC-8.0
10" pipe size part # PB-PVC-10.0
12" pipe size part # PB-PVC-12.0
14" pipe size part # PB-PVC-14.0
16" pipe size part # PB-PVC-16.0
18" pipe size part # PB-PVC-18.0
20" pipe size part # PB-PVC-20.0

Is a fitting for temperature sensor required?
No, skip to next section

Yes, a fitting for temperature sensor is required.

If Other was selected, please indicate below what pipe material will be used and proceed to anti-vortex plate.


Are penetration flange sets required?
No, skip to next section

Yes, penetration flange sets are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PF-PVC-1.5
2" pipe size part # PF-PVC-2.0
3" pipe size part # PF-PVC-3.0
4" pipe size part # PF-PVC-4.0
6" pipe size part # PF-PVC-6.0
8" pipe size part # PF-PVC-8.0
10" pipe size part # PF-PVC-10.0
12" pipe size part # PF-PVC-12.0
14" pipe size part # PF-PVC-14.0
16" pipe size part # PF-PVC-16.0
18" pipe size part # PF-PVC-18.0
20" pipe size part # PF-PVC-20.0

Are penetration boots required?
No, skip to next section

Yes, penetration boots are required.

Qty required for each pipe size should be indicated below.
1.5" pipe size part # PB-PVC-1.5
2" pipe size part # PB-PVC-2.0
3" pipe size part # PB-PVC-3.0
4" pipe size part # PB-PVC-4.0
6" pipe size part # PB-PVC-6.0
8" pipe size part # PB-PVC-8.0
10" pipe size part # PB-PVC-10.0
12" pipe size part # PB-PVC-12.0
14" pipe size part # PB-PVC-14.0
16" pipe size part # PB-PVC-16.0
18" pipe size part # PB-PVC-18.0
20" pipe size part # PB-PVC-20.0

Is an anti-vortex plate required on the suction outlet?
No, an anti-vortex plate is NOT required.
Yes, an anti-vortex plate is required.

Is a penetration reinforcement wall panel required?
No, a penetration reinforcement wall panel is NOT required.
Yes, a penetration reinforcement wall panel is required.

PACKAGING AND SHIPPING
Is packaging required for:
Domestic by common carrier
Export

Is shipping required for:
Domestic by common carrier
Export

Is shipping preferred by:

 



Comments/Questions:











 
image